MoCA2.5 Access Master

Key words:

MoCA2.5 ACCESS

Classification:

MoCA2.5 ACCESS

Product Description

Brief Views

Access MoCA2.5 products extends fiber deployments using the MoCA2.5 Access technology. It provides Gigabit or MultiGigabit symmetrical broadband performance over existing in-building coaxial infrastructure. It is cost-effective and rapid to deploy. It can co-exist with legacy TV services and DOCSiS 3.0 &3.1.

It is using available in-building coaxial network spectrum and it supports any type of coaxial topology. Supports up 2.5 Gbps symmetrical data rates with low latency to maximum 31 slave in a shared point-to-multipoint network.

Cost-effective complement to FTTH-deployments that solve the Last Mile Challenge and significantly increases the take-up rate in existing multi family housing.

Functional Feature

Complied with MoCA2.5 Access standard, up 2.5 Gbps symmetrical data rates;
Frequency range: 400-1675MHz, Maximum 500MHz Channel Bandwidth;
Bonded operation with 3, 4 or 5 RF-channels, 100MHz per channel;
PHY Rate up to 700Mbps and MAC Rate up to 500Mbps per RF-channel;
Spectrum spreading: OFDM, Multiplexing methods: TDMA/TDD;
Maximum output power up to 9 dBm, support up to 70dB attenuation;
Attenuation(up to 700Mbps PHY Rate): 100% link quality at 50 dB attenuation;
Roundtrip average Latency 6ms;
Supports VLAN tag addition, removal, or translation;
Supports co-existence with existing TV-services;
Provides one LAN port 1.0/2.5Gbps for local management(NC);
Supports 1X SFP+ slot inside enclosure: Supports Ethernet 1.0/2.5/10 Gbps(NC);
Supports Web and SNMP remote management.

Specification

Basic Info
Technical Standard	MOCA 2.5 Access standard
Maximum Network Node	31
Communication Mode
Modulation Mode	OFDM
Sub-carrier Quantity	512×5
Carrier Modulation	Multicarrier Modulation
Density	QAM 1024 /512 /256 /128 /64 /32 /16 /8 /BPSK/QPSK
MAC Layer Protocol	TDMA/TDD
Maximum PHY Rate	3.5Gbps, up to 700 Mbps per RF-channel
Maximum MAC Rate	2.5Gbps, up to 500 Mbps per RF-channel
Frequency Property
Operating Frequency Range	400-1675MHz
Standard Channel	Extended D-band：1150～1650MHz
Channel Bandwidth	5×100MHz
Maximum Transmitting Power	9dBm
Typical Transmitting Power	7dBm
Power Transmitting Mode	Adaptive or manual adjustment
Receiving Sensitivity	﹣70dBm
CABLE IN Port Frequency	5～1675MHz
MoCA Port Frequency	1125～1675MHz (Extended D-band)
TV OUT Port Frequency	5～1002 MHz
Insertion Loss	≤2dB
Latency
Typical	3ms
Maximum	6.1ms
Delay Jitter	≤1ms
Port Property
Hi/Lo Pass Filter Access Mode	built-in
RF Port	One mixed-signal port and one TV signal port, F-type
Ethernet Port	NC : 1100/1000Mbps and 12.5Gbps RJ45 Port CPE: 1100/1000Mbps or 12.5Gbps RJ45 Port, 2100/1000Mbps or 22.5Gbps RJ45 Port, 4*100/1000Mbps RJ45 Port
Power SupplyPort	DC 12V
Power & Consumption
Power Supply	DC 12V/1A, External
Power Consumption	NC : ≤10W CPE: ≤5W
Dimension
Dimension (L×W×H）	NC: 180mm x 125mm x 35mm CPE: 125mm x85mm x 25mm
Operating Environment
Operating Temperature	0℃ ～ 55℃
Operating Humidity	5%～95%，non condensing
Store Temperature	﹣30℃ ～ 70℃

Network application

Typical Business：Internet、CATV
Typical Solution：FTTB

Figure: Application Diagram

Ordering Information

Product Name	Product Model	Descriptions
NC	YTMN-51A1-D	1*1.0/2.5Gbps Ethernet interface, 1 SFP+ interface ,Supports Ethernet 1.0/2.5/10 Gbps, One mixed-signal port and one TV signal port.
CPE(1*GE)	YTMC-51N1-D	1*10/100/1000Mbps Ethernet interface, One mixed-signal port and one TV signal port.
CPE(2*GE)	YTMC-51N2-D	2*10/100/1000Mbps Ethernet interface, One mixed-signal port and one TV signal port.
CPE(4*GE)	YTMC-51N4-D	4*10/100/1000Mbps Ethernet interface, One mixed-signal port and one TV signal port.
CPE(1*2.5GE)	YTMC-51N1-D2	1*1.0/2.5Gbps Ethernet interface, One mixed-signal port and one TV signal port.
CPE(2*2.5GE)	YTMC-51N2-D2	2*1.0/2.5Gbps Ethernet interface, One mixed-signal port and one TV signal port.

无

MoCA2.5 Access Salve