Picture Name
Forward Path Optical Receiver YTOR386GM-4 / YTOR386GS-4
Forward Path Optical Receiver YTOR386GM-4 / YTOR386GS-4
+
  • Forward Path Optical Receiver YTOR386GM-4 / YTOR386GS-4
  • Forward Path Optical Receiver YTOR386GM-4 / YTOR386GS-4

Forward Path Optical Receiver YTOR386GM-4 / YTOR386GS-4

Key words:

Optical Platform

Classification:

Optical Platform

Contact Us
  • Product Description
  • Features
  • Parameters
  • The forward path optical transceiver module is mainly used in the headend and sub-headend equipment rooms of the HFC networks, receiving the downlink optical signal and converting it into RF electrical signal, and amplifying it to the signal level required by the customer, and then used as the signal source of the optical transmitter and RF amplifier modules after the distribution network.

    • Used high-performance photodetectors, which can ensure excellent CNR indicators at lower optical input.
    • The output stage amplifier uses high-performance GaS module to ensure that the output CSO/CTB index is excellent.
    • Built-in AGC/MGC function, the optical input AGC range is -7~+2dbm,it also can be user-defined.
    • Built-in equalization, which range is 0~10dB.
    • One-way or two-way distribution output type optional.
    • Two-channel optical inputs type optional, with built-in RF switching function, which can realize automatic/manual switching of the optical path according to the input optical power or RF level of the optical paths.

    Parameter

    Value

    Optical Wavelength  

    1290~1570nm

    Optical Input  Range 

    -9~+3dBm

    Optical AGCRange

    -7~+2dBm or Customized

    Optical Return  Loss

    ≥45dB

    RF Frequency

    47~1003/1218 MHz

    RF Output Level

    ≥105dBuV

    RF Return  Loss

    ≥16dB

    Flatness

    ±0.75 dB

    ATT Adjustable Range

    0~10dB

    EQ Adjustable Range

    0~10dB

    CNR/ CTB / CSO 

    ≥51dB /≥68dB /≥65dB

    Optical Connector Style 

    SC/APC or FC/APC

    Power Consumption  

    15W

     

  • ●RF amplifier module is mainly used for cable television headend room, for HFC network downlink signal transmission
    device, the input signal amplification to the customer the desired signal level, the distribution network as a light emitting
    module drive signal source. 
    ●the built-in two-stage amplification and pre selection of Low Noise GaAs push-pull module, output stage selection of
    high performance GaAs power doubler module, to ensure RF amplifier module output parameters is excellent.
    ●the built-in AGC/MGC function, can be switched to set, AGC reference level can be set; built-in power balance, all support
    optical platform menu settings.
    ●the input / output terminals are designed with high pass filter, in order to isolate the link noise; and a module
    overvoltage protection circuit, to prevent the impact of static electricity and low frequency impact, in order to ensure
    the reliability of the module.
    ●through the platform optical liquid crystal display to monitor RF input / output level, AGC/MGC state control, equilibrium
    volume settings, AGC reference level values and parameters of various voltage, and can be realized through optical
    platform RF amplifier module of remote network monitoring.

Related Products